Spots Made to Measure Curtains
We can make your curtains to a beautifully high standard
We can make your made to measure Curtains just how you would like them. Each item is beautifully made in our traditional workshop by professionals, hand finished with great care and attention, and delivered to your door within seven weeks.
There is a choice of six heading styles of curtains which can be lined in four different ways, dependant on personal preference. Our focus is on quality, and making the best possible curtains which you can enjoy for years to come.
If you choose a second fabric to line your curtains, please be aware that the lining fabric will be vulnerable to fading.
With the help buttons at each stage of the process we will be able to guide you easily through the steps. The next step is to choose your desired fabric.
Let's get started by selecting your fabric…
How to measure up for your curtains:
Please remember that pattern repeats and fabric widths are automatically calculated if you order through our web site. It is advisable to fit your pole or track before ordering your curtains. Your pole or track should ideally extend 30cms on each side of the window so when drawn back light is maximised and at least 15cms above the top of the window to block out as little light as possible again.
Width: If you have a pole, measure the distance between the finials. (A)
Finished length: FOR PENCIL PLEAT, TRIPLE PLEAT, DOUBLE PLEAT and INVERTED PLEAT CURTAINS when measuring the finished length using a curtain pole we recommend allowing between 2cms and 5cms above the eyelet on the underside of the curtain ring, depending on how much of the pole and rings you wish to hide. From the measurement you choose above the eyelet, measure down to the bottom of the hem (see B & C) and that is your finished length measurement. PLEASE NOTE THAT THIS IS NOT APPLICABLE FOR FLOP OVER FRILL CURTAINS NOR COTTAGE PLEAT (SEE BELOW).
Finished length: FOR COTTAGE PLEAT CURTAINS, THESE HAVE TO BE MADE WITH A ONE INCH SINGLE POSITION TAPE which makes the finished length non-adjustable; so to get your finished lenght meaurement just give us the measurement from the eyelet to the floor and add 5 cm for the cottage pleat.
FINISHED LENGTH: FOR FLOP OVER FRILL CURTAINS THESE HAVE TO BE MADE WITH A ONE INCH SINGLE POSITION TAPE which makes the finished length non-adjustable; so to get your finished length meaurement just give us the measurement from the eyelet to the floor and don't add any extra for the frilll we will do that.
We will add 25cms for hem allowance.
If you have a track, measure the total length of the track, including any overlap where the curtains meet in the middle.
Finished length: FOR PENCIL PLEAT, TRIPLE PLEAT, DOUBLE PLEAT and INVERTED PLEAT CURTAINS - When measuring the finished length of your curtains using a track add 1cm above the track (to hide the track) down to the bottom of the hem. (D)*
FINISHED LENGTH: FOR COTTAGE PLEAT CURTAINS, THESE HAVE TO BE MADE WITH A ONE INCH SINGLE POSITION TAPE which makes the finished length non-adjustable; so to get your finished lenght meaurement just give us the measurement from the eyelet to the floor and add 5 cm for the cottage pleat.
We will add 25cms for hem allowance.
PLEASE USE ONLY METRIC UNITS WHEN MEASURING
- Artisan Collection
- Birds and Beasts Collection with Harris Tweed
- Scandinavian Woven Collection
- Bohemian Collection
- Swedish Collection
- Hand Printed Collection
- Plain Linen Union Collection
- Meadow Collection
- Earth Collection
- Sky Collection
- Woodland Collection
- Wildflower Collection
- Seaside Collection
- Cockerel Collection
- Red and Rust
- Duck Egg
- Whites & Off Whites
- Chickens & Feathers
- Leaves & Ferns
- Harris Tweed